All packages

bb_sensor_ina219

Beam Bots integration for the INA219 voltage/current/power monitor over I2C.
bb_sensor_ina219 Nerves compatibility badge

Maintained on Hex by jamesotron

Memory: last toolchain build peaked at 533 MiB of 2 GiB

Latest version
0.2.4
Last run
27 days ago
Checks
4

This package compiles cleanly for all tested hardware using Nerves.

What does Nerves compatibility mean?

Nerves builds Elixir firmware for embedded devices such as the Raspberry Pi and BeagleBone. This site adds each Hex package to a fresh Nerves project and builds firmware for a set of common boards, the targets listed below.

A package that compiles for every target is very likely to work on a device. A failure usually comes from native code (C, Rust or Zig) that does not cross-compile, or from something the build expects on a desktop machine. It does not prove the package is unusable: a fix may be a configuration change away.

Target / check Status Firmware size Run
host
host
pass —
bb_sensor_ina219-0.2.4-1792952568604
nerves_system_mangopi_mq_pro
0.17.2
from the Sep 22, 2026 build
pass 29199095
bb_sensor_ina219-0.2.4-1792952568604
nerves_system_rpi4
2.1.2
from the Sep 22, 2026 build
pass 45528198
bb_sensor_ina219-0.2.4-1792952568604
nerves_system_x86_64
1.34.2
from the Sep 22, 2026 build
pass 32914596
bb_sensor_ina219-0.2.4-1792952568604

Add this badge to your README

It updates itself as bb_sensor_ina219's compatibility is reassessed.

bb_sensor_ina219 Nerves compatibility badge
Markdown
HTML