beam_spy
Maintained on Hex by quinnwilton
Memory: last toolchain build peaked at 286 MiB of 2 GiB
This package compiles cleanly for all tested hardware using Nerves.
What does Nerves compatibility mean?
Nerves builds Elixir firmware for embedded devices such as the Raspberry Pi and BeagleBone. This site adds each Hex package to a fresh Nerves project and builds firmware for a set of common boards, the targets listed below.
A package that compiles for every target is very likely to work on a device. A failure usually comes from native code (C, Rust or Zig) that does not cross-compile, or from something the build expects on a desktop machine. It does not prove the package is unusable: a fix may be a configuration change away.
| Target / check | Status | Firmware size | Run |
|---|---|---|---|
|
host
host
|
pass | — |
beam_spy-0.2.2-1793116190598
|
|
nerves_system_bbb
2.31.1
|
pass | 22906907 |
beam_spy-0.2.2-1793116190598
|
|
nerves_system_mangopi_mq_pro
0.18.1
|
pass | 25641690 |
beam_spy-0.2.2-1793116190598
|
|
nerves_system_qemu_aarch64
0.5.1
|
pass | 28951804 |
beam_spy-0.2.2-1793116190598
|
|
nerves_system_rpi0
2.2.1
|
pass | 32327643 |
beam_spy-0.2.2-1793116190598
|
|
nerves_system_rpi0_2
2.2.1
|
pass | 37663858 |
beam_spy-0.2.2-1793116190598
|
|
nerves_system_rpi4
2.2.1
|
pass | 41999744 |
beam_spy-0.2.2-1793116190598
|
|
nerves_system_rpi5
2.2.1
|
pass | 55674018 |
beam_spy-0.2.2-1793116190598
|
|
nerves_system_trellis
0.6.1
|
pass | 23447148 |
beam_spy-0.2.2-1793116190598
|
|
nerves_system_x86_64
1.35.1
|
pass | 31110911 |
beam_spy-0.2.2-1793116190598
|
Add this badge to your README
It updates itself as beam_spy's compatibility is reassessed.