All packages

blink_o_meter

BlinkOMeter is a project shell for an RPI0W prividing an analog panel meter and an RGB light as outputs. This package facilitates accessing those features.
blink_o_meter Nerves compatibility badge

Maintained on Hex by stwf

Memory: last toolchain build peaked at 88 MiB of 2 GiB

Latest version
1.0.0
Last run
27 days ago
Checks
5

This package compiles cleanly for all tested hardware using Nerves.

What does Nerves compatibility mean?

Nerves builds Elixir firmware for embedded devices such as the Raspberry Pi and BeagleBone. This site adds each Hex package to a fresh Nerves project and builds firmware for a set of common boards, the targets listed below.

A package that compiles for every target is very likely to work on a device. A failure usually comes from native code (C, Rust or Zig) that does not cross-compile, or from something the build expects on a desktop machine. It does not prove the package is unusable: a fix may be a configuration change away.

Target / check Status Firmware size Run
host
host
pass —
blink_o_meter-1.0.0-1792953800746
nerves_system_mangopi_mq_pro
0.17.2
from the Oct 1, 2026 build
pass 25640518
blink_o_meter-1.0.0-1792953800746
nerves_system_rpi4
2.1.2
from the Oct 1, 2026 build
pass 41968362
blink_o_meter-1.0.0-1792953800746
nerves_system_trellis
0.5.0
from the Oct 1, 2026 build
pass 23421878
blink_o_meter-1.0.0-1792953800746
nerves_system_x86_64
1.34.2
from the Oct 1, 2026 build
pass 29357360
blink_o_meter-1.0.0-1792953800746

Add this badge to your README

It updates itself as blink_o_meter's compatibility is reassessed.

blink_o_meter Nerves compatibility badge
Markdown
HTML