All packages

circuits_uart_midi_framing

Implements MIDI framing for Serial ports connected via Circuits.UART.
circuits_uart_midi_framing Nerves compatibility badge

Maintained on Hex by jamesotron

Memory: last toolchain build peaked at 124 MiB of 2 GiB

Latest version
1.0.0
Last run
27 days ago
Checks
5

This package compiles cleanly for all tested hardware using Nerves.

What does Nerves compatibility mean?

Nerves builds Elixir firmware for embedded devices such as the Raspberry Pi and BeagleBone. This site adds each Hex package to a fresh Nerves project and builds firmware for a set of common boards, the targets listed below.

A package that compiles for every target is very likely to work on a device. A failure usually comes from native code (C, Rust or Zig) that does not cross-compile, or from something the build expects on a desktop machine. It does not prove the package is unusable: a fix may be a configuration change away.

Target / check Status Firmware size Run
host
host
pass —
circuits_uart_midi_framing-1.0.0-1792955031365
nerves_system_mangopi_mq_pro
0.17.2
from the Oct 1, 2026 build
pass 25667150
circuits_uart_midi_framing-1.0.0-1792955031365
nerves_system_rpi4
2.1.2
from the Oct 1, 2026 build
pass 41993474
circuits_uart_midi_framing-1.0.0-1792955031365
nerves_system_trellis
0.5.0
from the Oct 1, 2026 build
pass 23440910
circuits_uart_midi_framing-1.0.0-1792955031365
nerves_system_x86_64
1.34.2
from the Oct 1, 2026 build
pass 29382614
circuits_uart_midi_framing-1.0.0-1792955031365

Add this badge to your README

It updates itself as circuits_uart_midi_framing's compatibility is reassessed.

circuits_uart_midi_framing Nerves compatibility badge
Markdown
HTML