cmdc_rag_arcana
Maintained on Hex by ntsai
Memory: last firmware build peaked at 718 MiB of 3 GiB, toolchain 424 MiB of 2 GiB
This package compiles cleanly for all tested hardware using Nerves.
What does Nerves compatibility mean?
Nerves builds Elixir firmware for embedded devices such as the Raspberry Pi and BeagleBone. This site adds each Hex package to a fresh Nerves project and builds firmware for a set of common boards, the targets listed below.
A package that compiles for every target is very likely to work on a device. A failure usually comes from native code (C, Rust or Zig) that does not cross-compile, or from something the build expects on a desktop machine. It does not prove the package is unusable: a fix may be a configuration change away.
| Target / check | Status | Firmware size | Run |
|---|---|---|---|
|
host
host
|
pass | — |
cmdc_rag_arcana-0.5.0-1794773972106
x86_64
|
|
nerves_system_bbb
2.31.2
|
pass | 34310685 |
cmdc_rag_arcana-0.5.0-1794773972106
x86_64
|
|
nerves_system_mangopi_mq_pro
0.18.2
|
pass | 37607596 |
cmdc_rag_arcana-0.5.0-1794773972106
x86_64
|
|
nerves_system_qemu_aarch64
0.5.2
|
pass | 40366480 |
cmdc_rag_arcana-0.5.0-1794773972106
x86_64
|
|
nerves_system_rpi0
2.2.2
|
pass | 43740391 |
cmdc_rag_arcana-0.5.0-1794773972106
x86_64
|
|
nerves_system_rpi0_2
2.2.2
|
pass | 49093191 |
cmdc_rag_arcana-0.5.0-1794773972106
x86_64
|
|
nerves_system_rpi4
2.2.2
|
pass | 53421926 |
cmdc_rag_arcana-0.5.0-1794773972106
x86_64
|
|
nerves_system_rpi5
2.2.2
|
pass | 67128885 |
cmdc_rag_arcana-0.5.0-1794773972106
x86_64
|
|
nerves_system_trellis
0.6.3
|
pass | 34854987 |
cmdc_rag_arcana-0.5.0-1794773972106
x86_64
|
|
nerves_system_x86_64
1.35.2
|
pass | 42855652 |
cmdc_rag_arcana-0.5.0-1794773972106
x86_64
|
Add this badge to your README
It updates itself as cmdc_rag_arcana's compatibility is reassessed.