duskmoon_oxc
Maintained on Hex by gsmlg
Memory: last firmware build peaked at 1.1 GiB of 3 GiB
This package did not compile cleanly for all tested hardware. It may still work with Nerves. See the per-target results below.
What does Nerves compatibility mean?
Nerves builds Elixir firmware for embedded devices such as the Raspberry Pi and BeagleBone. This site adds each Hex package to a fresh Nerves project and builds firmware for a set of common boards, the targets listed below.
A package that compiles for every target is very likely to work on a device. A failure usually comes from native code (C, Rust or Zig) that does not cross-compile, or from something the build expects on a desktop machine. It does not prove the package is unusable: a fix may be a configuration change away.
| Target / check | Status | Firmware size | Run |
|---|---|---|---|
|
host
host
|
pass | — |
duskmoon_oxc-10.1.12-1795280827460
x86_64
|
|
nerves_system_bbb
2.31.2
View log
|
fail | — |
duskmoon_oxc-10.1.12-1795280827460
x86_64
|
|
nerves_system_mangopi_mq_pro
0.18.2
View log
|
fail | — |
duskmoon_oxc-10.1.12-1795280827460
x86_64
|
|
nerves_system_qemu_aarch64
0.5.2
|
pass | 41476514 |
duskmoon_oxc-10.1.12-1795280827460
x86_64
|
|
nerves_system_rpi0
2.2.2
View log
|
fail | — |
duskmoon_oxc-10.1.12-1795280827460
x86_64
|
|
nerves_system_rpi0_2
2.2.2
|
pass | 50202704 |
duskmoon_oxc-10.1.12-1795280827460
x86_64
|
|
nerves_system_rpi4
2.2.2
|
pass | 54534006 |
duskmoon_oxc-10.1.12-1795280827460
x86_64
|
|
nerves_system_rpi5
2.2.2
|
pass | 68241215 |
duskmoon_oxc-10.1.12-1795280827460
x86_64
|
|
nerves_system_trellis
0.6.3
View log
|
fail | — |
duskmoon_oxc-10.1.12-1795280827460
x86_64
|
|
nerves_system_x86_64
1.35.2
|
pass | 44613024 |
duskmoon_oxc-10.1.12-1795280827460
x86_64
|
Add this badge to your README
It updates itself as duskmoon_oxc's compatibility is reassessed.