All packages

ex_windspeed

Interface for reading data from a windspeed sensor
ex_windspeed Nerves compatibility badge

Maintained on Hex by frigidcode

Memory: last toolchain build peaked at 60 MiB of 2 GiB

Latest version
0.1.0-beta
Last run
27 days ago
Checks
6

This package compiles cleanly for all tested hardware using Nerves.

What does Nerves compatibility mean?

Nerves builds Elixir firmware for embedded devices such as the Raspberry Pi and BeagleBone. This site adds each Hex package to a fresh Nerves project and builds firmware for a set of common boards, the targets listed below.

A package that compiles for every target is very likely to work on a device. A failure usually comes from native code (C, Rust or Zig) that does not cross-compile, or from something the build expects on a desktop machine. It does not prove the package is unusable: a fix may be a configuration change away.

Target / check Status Firmware size Run
host
host
pass —
ex_windspeed-0.1.0-beta-1792961965421
nerves_system_mangopi_mq_pro
0.17.2
from the Oct 2, 2026 build
pass 25640236
ex_windspeed-0.1.0-beta-1792961965421
nerves_system_rpi0_2
2.2.1
pass 37473157
ex_windspeed-0.1.0-beta-1792961965421
nerves_system_rpi4
2.1.2
from the Oct 2, 2026 build
pass 41967949
ex_windspeed-0.1.0-beta-1792961965421
nerves_system_trellis
0.5.0
from the Oct 2, 2026 build
pass 23420941
ex_windspeed-0.1.0-beta-1792961965421
nerves_system_x86_64
1.34.2
from the Oct 2, 2026 build
pass 29354160
ex_windspeed-0.1.0-beta-1792961965421

Add this badge to your README

It updates itself as ex_windspeed's compatibility is reassessed.

ex_windspeed Nerves compatibility badge
Markdown
HTML