gproc
Maintained on Hex by uwiger
Memory: last firmware build peaked at 361 MiB of 2 GiB, toolchain 190 MiB of 2 GiB
This package compiles cleanly for all tested hardware using Nerves.
What does Nerves compatibility mean?
Nerves builds Elixir firmware for embedded devices such as the Raspberry Pi and BeagleBone. This site adds each Hex package to a fresh Nerves project and builds firmware for a set of common boards, the targets listed below.
A package that compiles for every target is very likely to work on a device. A failure usually comes from native code (C, Rust or Zig) that does not cross-compile, or from something the build expects on a desktop machine. It does not prove the package is unusable: a fix may be a configuration change away.
| Target / check | Status | Firmware size | Run |
|---|---|---|---|
|
host
host
|
pass | — |
gproc-1.3.0-1794983781371
x86_64
|
|
nerves_system_mangopi_mq_pro
0.18.2
|
pass | 25506515 |
gproc-1.3.0-1794983781371
x86_64
|
|
nerves_system_rpi0_2
2.2.1
from the Oct 25, 2026 build
|
pass | 37528171 |
gproc-1.3.0-1794983781371
x86_64
|
|
nerves_system_rpi4
2.2.2
|
pass | 41871960 |
gproc-1.3.0-1794983781371
x86_64
|
|
nerves_system_x86_64
1.35.2
|
pass | 30973783 |
gproc-1.3.0-1794983781371
x86_64
|
Add this badge to your README
It updates itself as gproc's compatibility is reassessed.