paper_tiger
Maintained on Hex by enaia , neilberkman
Memory: last firmware build peaked at 922 MiB of 2 GiB, toolchain 542 MiB of 2 GiB
This package compiles cleanly for all tested hardware using Nerves.
What does Nerves compatibility mean?
Nerves builds Elixir firmware for embedded devices such as the Raspberry Pi and BeagleBone. This site adds each Hex package to a fresh Nerves project and builds firmware for a set of common boards, the targets listed below.
A package that compiles for every target is very likely to work on a device. A failure usually comes from native code (C, Rust or Zig) that does not cross-compile, or from something the build expects on a desktop machine. It does not prove the package is unusable: a fix may be a configuration change away.
| Target / check | Status | Firmware size | Run |
|---|---|---|---|
|
host
host
|
pass | — |
paper_tiger-1.6.0-1795126027316
x86_64
|
|
nerves_system_bbb
2.31.2
|
pass | 23780441 |
paper_tiger-1.6.0-1795126027316
x86_64
|
|
nerves_system_mangopi_mq_pro
0.18.2
|
pass | 26515843 |
paper_tiger-1.6.0-1795126027316
x86_64
|
|
nerves_system_qemu_aarch64
0.5.2
|
pass | 29826233 |
paper_tiger-1.6.0-1795126027316
x86_64
|
|
nerves_system_rpi0
2.2.2
|
pass | 33208807 |
paper_tiger-1.6.0-1795126027316
x86_64
|
|
nerves_system_rpi0_2
2.2.2
|
pass | 38552079 |
paper_tiger-1.6.0-1795126027316
x86_64
|
|
nerves_system_rpi4
2.2.2
|
pass | 42882777 |
paper_tiger-1.6.0-1795126027316
x86_64
|
|
nerves_system_rpi5
2.2.2
|
pass | 56588961 |
paper_tiger-1.6.0-1795126027316
x86_64
|
|
nerves_system_trellis
0.6.3
|
pass | 24315522 |
paper_tiger-1.6.0-1795126027316
x86_64
|
|
nerves_system_x86_64
1.35.2
|
pass | 31985419 |
paper_tiger-1.6.0-1795126027316
x86_64
|
Add this badge to your README
It updates itself as paper_tiger's compatibility is reassessed.