All packages

sht31gs

An application to demonstrate how one might write an OTP-compliant GenServer Application for an IoT device accessed with ElixirALE
sht31gs Nerves compatibility badge

Maintained on Hex by rabarar

Memory: last toolchain build peaked at 107 MiB of 2 GiB

Latest version
0.1.1
Last run
17 days ago
Checks
10

This package compiles cleanly for all tested hardware using Nerves.

What does Nerves compatibility mean?

Nerves builds Elixir firmware for embedded devices such as the Raspberry Pi and BeagleBone. This site adds each Hex package to a fresh Nerves project and builds firmware for a set of common boards, the targets listed below.

A package that compiles for every target is very likely to work on a device. A failure usually comes from native code (C, Rust or Zig) that does not cross-compile, or from something the build expects on a desktop machine. It does not prove the package is unusable: a fix may be a configuration change away.

Target / check Status Firmware size Run
host
host
pass —
sht31gs-0.1.1-1793814372293
nerves_system_bbb
2.31.1
pass 22722661
sht31gs-0.1.1-1793814372293
nerves_system_mangopi_mq_pro
0.18.1
pass 25464453
sht31gs-0.1.1-1793814372293
nerves_system_qemu_aarch64
0.5.1
pass 28774174
sht31gs-0.1.1-1793814372293
nerves_system_rpi0
2.2.1
pass 32145612
sht31gs-0.1.1-1793814372293
nerves_system_rpi0_2
2.2.1
pass 37485600
sht31gs-0.1.1-1793814372293
nerves_system_rpi4
2.2.1
pass 41818221
sht31gs-0.1.1-1793814372293
nerves_system_rpi5
2.2.1
pass 55496049
sht31gs-0.1.1-1793814372293
nerves_system_trellis
0.6.1
pass 23258123
sht31gs-0.1.1-1793814372293
nerves_system_x86_64
1.35.1
pass 30931363
sht31gs-0.1.1-1793814372293

Add this badge to your README

It updates itself as sht31gs's compatibility is reassessed.

sht31gs Nerves compatibility badge
Markdown
HTML