wasmex
Maintained on Hex by tessi
Memory: last firmware build peaked at 824 MiB of 3 GiB
This package did not compile cleanly for all tested hardware. It may still work with Nerves. See the per-target results below.
What does Nerves compatibility mean?
Nerves builds Elixir firmware for embedded devices such as the Raspberry Pi and BeagleBone. This site adds each Hex package to a fresh Nerves project and builds firmware for a set of common boards, the targets listed below.
A package that compiles for every target is very likely to work on a device. A failure usually comes from native code (C, Rust or Zig) that does not cross-compile, or from something the build expects on a desktop machine. It does not prove the package is unusable: a fix may be a configuration change away.
| Target / check | Status | Firmware size | Run |
|---|---|---|---|
|
host
host
|
pass | — |
wasmex-0.18.0-1795083061040
x86_64
|
|
nerves_system_bbb
2.31.2
View log
|
fail | — |
wasmex-0.18.0-1795083061040
x86_64
|
|
nerves_system_mangopi_mq_pro
0.18.2
|
pass | 44911193 |
wasmex-0.18.0-1795083061040
x86_64
|
|
nerves_system_qemu_aarch64
0.5.2
|
pass | 42229489 |
wasmex-0.18.0-1795083061040
x86_64
|
|
nerves_system_rpi0
2.2.2
View log
|
fail | — |
wasmex-0.18.0-1795083061040
x86_64
|
|
nerves_system_rpi0_2
2.2.2
|
pass | 50955866 |
wasmex-0.18.0-1795083061040
x86_64
|
|
nerves_system_rpi4
2.2.2
|
pass | 55287588 |
wasmex-0.18.0-1795083061040
x86_64
|
|
nerves_system_rpi5
2.2.2
|
pass | 68992621 |
wasmex-0.18.0-1795083061040
x86_64
|
|
nerves_system_trellis
0.6.3
View log
|
fail | — |
wasmex-0.18.0-1795083061040
x86_64
|
|
nerves_system_x86_64
1.35.2
|
pass | 46052656 |
wasmex-0.18.0-1795083061040
x86_64
|
Add this badge to your README
It updates itself as wasmex's compatibility is reassessed.