All packages

diode_client

DiodeClient allows direct P2P connection to any other DiodeClient user on the planet using Ethereum Addresses (e.g. 0xb794f5ea0ba39494ce839613fffba74279579268) and BNS names (e.g. yourname.diode) instead of IPv4 or IPv6
diode_client Nerves compatibility badge

Maintained on Hex by diodechain

Memory: last toolchain build peaked at 242 MiB of 2 GiB

Latest version
1.4.12
Last run
Sep 15, 2026
Checks
4

This package did not compile cleanly for all tested hardware. It may still work with Nerves. See the per-target results below.

What does Nerves compatibility mean?

Nerves builds Elixir firmware for embedded devices such as the Raspberry Pi and BeagleBone. This site adds each Hex package to a fresh Nerves project and builds firmware for a set of common boards, the targets listed below.

A package that compiles for every target is very likely to work on a device. A failure usually comes from native code (C, Rust or Zig) that does not cross-compile, or from something the build expects on a desktop machine. It does not prove the package is unusable: a fix may be a configuration change away.

Target / check Status Firmware size Run
host
host
pass —
diode_client-1.4.12-1789456042005
nerves_system_mangopi_mq_pro
0.17.2
View log
fail —
diode_client-1.4.12-1789456042005
nerves_system_rpi4
2.1.2
View log
fail —
diode_client-1.4.12-1789456042005
nerves_system_x86_64
1.34.2
View log
fail —
diode_client-1.4.12-1789456042005

Add this badge to your README

It updates itself as diode_client's compatibility is reassessed.

diode_client Nerves compatibility badge
Markdown
HTML